欢迎来到SCA

How to fix the frame tent on the ground

How to fix the frame tent on the ground



The floor nail is one of the most important parts of the Frame Tent. It is mainly used to fix the Frame Tent, but it also has a very important function, which is to pull off the corners of the outer tent and fix it on the ground to separate the inner tent from the outer tent. . At this time, under the combined action of the account pole and the ground nail, the external account will form an independent dome and will not directly contact the internal account.

How to fix Frame Tent on the ground:

First prop up the Frame Tent and build it up. Then tie the corners of the Frame Tent with a rope, and pay attention to the length of the rope to be enough for the next step. Then tie the tied rope to a heavy object, such as a stone. Finally, stretch the weight to fix the Frame Tent.

How to build A-shaped Frame Tent:

First open the Frame Tent bag, take out the Frame Tent, lay it down, and take out all the supplies. Insert the two main columns vertically into the soil, and place the floor mats in the Frame Tent so that the four corners formed by the main columns are fixed on the ground in parallel. This step is relatively easy. Then put the Frame Tent wall flat on the main column and nail it to the ground. The windproof rope is fixed to the Frame Tent wall and also fixed to the ground.

How to build a pyramid frame tent:

Connect the pillars of the Frame Tent and fix them on the four corners. Put the wall firmly on the pillar and insert it into the casing holes at both ends. If the Frame Tent is multi-pillar, the other pillars are also sheathed in the same way. Insert the pillar into the ground at an angle of 45 to 60 degrees to fix it. Carefully check each set of holes in the account to ensure that each set of holes has a corresponding connection point. Finally, tighten the wind rope outside the Frame Tent and nail it. Some Frame Tents are double-layered. After construction, there should be enough space between the two walls to maintain air circulation.

Triangular Frame Tent construction method:

Lay the Frame Tent flat on the ground, then nail it firmly, connect the pillars, and pass them into the sleeve holes on the inner tent. If you have a mosquito net, put the mosquito net's holes on the pillar, and other holes should be worn according to the positions indicated in the instructions. Follow the instructions to tie the two pillars together. Put the wall on the pillar, paying attention to the zipper outside. Some Frame Tents are equipped with rain cover, which is installed outside the wall. Finally nail the ground nail and the wind rope.

Get In Touch